 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler January 2006 FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Features General Description The FOD0708 and FOD0738 optocouplers consist of an AlGaAs LED optically coupled to a high speed transimpedance amplifier and voltage comparator. These optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The devices are housed in a compact 8-pin SOIC package for optimum mounting density. +5 V CMOS compatibility 15 ns typical pulse width distortion 30 ns max. pulse width distortion 40 ns max. propagation delay skew High speed: 15 MBd 60 ns max. propagation delay 10 kV/s minimum common mode rejection -40C to 100C temperature range UL approved (file #E90700) Applications Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Package Dimensions 0.164 (4.16) 0.144 (3.66) SEATING PLANE Pin 1 0.202 (5.13) 0.182 (4.63) 0.019 (0.48) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.050 (1.27) TYP 0.244 (6.19) 0.224 (5.69) Lead Coplanarity : 0.004 (0.10) MAX NC 1 8 VDD ANODE 1 1 8 VDD TRUTH TABLE LED VO, OUTPUT L H OFF ON ANODE 2 7 NC CATHODE 1 2 7 VO 1 CATHODE 3 6 VO CATHODE 2 3 6 VO 2 Note: A 0.1F bypass capacitor must be connected between pins 5 and 8. NC 4 5 GND ANODE 2 4 5 GND FOD0708 FOD0738 (c)2005 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler Rev. 1.0.6 FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Absolute Maximum Ratings TA = 25C unless otherwise noted Symbol TS TA VDD VO IO IF Parameter Storage Temperature Ambient Operating Temperature Supply Voltages Output Voltage Average Output Current Average Forward Input Current Lead Solder Temperature Solder Reflow Temperature Profile LED Power Dissipation Single Channel Dual Channel Detector Power Dissipation Single Channel Dual Channel Min. -40 -40 0 -0.5 Max. +125 +100 6 VDD + 0.5 2 20 Units C C Volts Volts mA mA 260C for 10 sec., 1.6 mm below seating plane See Solder Reflow Temperature Profile Section 40 mW (derate above 95C, 1.4 mW/C) 40 mW per channel (derate above 90C, 1.2 mW/C) 85 mW (derate above 75C, 1.8 mW/C) 65 mW per channel (derate above 90C, 2.0 mW/C) Recommended Operating Conditions Symbol TA VDD IF Supply Voltages Input Current (ON) Parameter Ambient Operating Temperature Min. -40 4.5 10 Max. +100 5.5 16 Units C Volts mA Electrical Characteristics (TA = -40C to +100C) and 4.5 V VDD 5.5 V Symbol VF BVR VOH VOL ITH IDDL IDDH Parameter Input Forward Voltage Input Reverse Breakdown Voltage Logic High Output Voltage Logic Low Output Voltage Input Threshold Current Logic Low Output Supply Current Logic High Output Supply Current (FOD0708) (FOD0738) (FOD0708) (FOD0738) (FOD0708) (FOD0738) Test Conditions IF = 12 mA IR = 10 A IF = 0, IO = -20 A IF = 12 mA, IO = 20 A IOL = 20 A IF = 12 mA IF = 0 Min. Typ.* Max. Units Fig. 1.3 5 4.0 5.0 0.01 4.0 4.4 3.4 6.9 3.7 7.5 0.1 8.2 8.2 14.0 18.0 11.0 15.0 1.45 1.8 V V V V mA mA mA 1,5 3,7 4,8 9 *All typicals at TA = 25C and VDD = 5V unless otherwise noted. 2 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Switching Characteristics Over recommended temperature (TA = -40C to +100C) and 4.5 V VDD 5.5 V. All typical specifications are at TA = 25C, VDD = +5 V. Symbol tPHL tPLH Parameter Propagation Delay Time to Logic Low Output Propagation Delay Time to Logic High Output Pulse Width Pulse Width Distortion Propagation Delay Skew Test Conditions IF = 12 mA, CL = 15 pF CMOS Signal Levels, note 1, fig. 10 IF = 12 mA, CL = 15 pF FOD0708 CMOS Signal Levels, FOD0738 note 1, fig. 10 IF = 12 mA, CL = 15 pF CMOS Signal Levels, note 2 IF = 12 mA, CL = 15 pF CMOS Signal Levels, note 3 Min. 20 13 11 100 0 Typ.* Max. 60 60 60 Units ns ns PW | PWD | tPSK tR tF | CMH | ns 30 40 12 8 ns ns ns ns kV/s Output Rise Time (10%-90%) IF = 12 mA, CL = 15 pF CMOS Signal Levels Output Fall Time (90%-10%) Common Mode Transient Immunity at Logic High Output IF = 12 mA, CL = 15 pF CMOS Signal Levels VCM = 1000 V, TA = 25C, IF = 0 mA, note 4, fig. 11 25 50 | CML | Common Mode Transient VCM = 1000 V, TA = 25C, IF = 12 mA, Immunity at Logic Low Output note 5, fig. 11 25 50 kV/s *All typicals at TA = 25C and VDD = 5V unless otherwise noted. Isolation Characteristics (TA = -40C to +100C Unless otherwise specified.) Characteristics Input-Output Insulation Leakage Current Withstand Insulation Test Voltage Resistance (Input to Output) Capacitance (Input to Output) Test Conditions Symbol (Relative humidity = 45%) (TA = 25C, t = 5 s) (VI-O = 3000 VDC) (Note 6) (II-O 10 A, RH < 50%, TA = 25C) (t = 1 min.) (Note 6) (VI-O = 500 V) (Note 6) (f = 1 MHz) (Note 6) II-O Min Typ.** Max 1.0 Unit A VISO RI-O CI-O 2500 1012 0.6 VRMS pF ** All typical values are at VCC = 5 V, TA = 25C Notes: 1. Propagation delay time, high to low (tPHL), is measured from the 50% level on the rising edge of the input pulse to the 2.5V level of the falling edge of the output voltage signal. Propagation delay time, low to high (tPLH), is measured from the 50% level on the falling edge of the input pulse to the 2.5V level of the rising edge of the output voltage signal. 2. Pulse width distoration is defined as the absolute difference between the high to low and low to high propagation delay times, | tPHL - tPLH |. 3. Propagation delay skew, tPSK, is defined as the worst case difference in tPHL or tPLH between units within the recommended operating range of the device. 4. CMH - The maximum tolerated rate of rise of the common mode voltage to ensure the output will remain in the high state, (i,e., VOUT > 2.0V) Measured in kilovolts per microsecond (kV/s). 5. CML - The maximum tolerated rate of fall of the common mode voltage to ensure the output will remain in the low state, (i,e., VOUT < 0.8V). Measured in kilovolts per microsecond (kV/s). 6. Isolation voltage, VISO, is an internal device dielectric breakdown rating. For this test, pins 1,2,3,4 are common, and pins 5,6,7,8 are common. 3 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Typical Characteristics Figure 1. FOD0708 Typical Input Threshold Current vs Ambient Temperature 7 VDD = 5V IOL = 20A 100 VDD = 5V o TA = 25 C 80 Figure 2. FOD0708 Typical Switching Speed vs Pulse Input Current ITH - Input Threshold Current (mA) tP - Propagation Delay (ns) 6 5 60 tPHL 40 tPLH 4 3 20 PWD 2 -40 -20 0 20 40 60 o 0 5 7 9 11 13 15 80 100 TA - Ambient Temperature ( C) IF - Pulse Input Current (mA) Figure 3. FOD0708 Typical Logic Low Output Supply Current vs Ambient Temperature 5.0 5.0 VDD = 5V IF = 12mA 4.5 Figure 4. FOD0708 Typical Logic High Output Supply Current vs Ambient Temperature IDDH - Logic High Output Supply Current (mA) VDD = 5V 4.5 IDDL - Logic Low Output Supply Current (mA) 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 -40 -20 0 20 40 60 80 100 2.0 -40 -20 0 20 40 60 80 100 TA - Ambient Temperature (oC) TA - Ambient Temperature (oC) 4 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Typical Characteristics (Continued) Figure 5. FOD0738 Typical Input Threshold Current vs Ambient Temperature 7 VDD = 5V IOL = 20A Channel 1 Channel 2 80 100 VDD = 5V o TA = 25 C Channel 1 Channel 2 Figure 6. FOD0738 Typical Switching Speed vs Pulse Input Current ITH - Input Threshold Current (mA) 6 5 tP - Propagation Delay (ns) 60 tPHL 40 tPLH 20 PWD 4 3 2 -40 -20 0 20 40 60 o 0 80 100 5 7 9 11 13 15 TA - Ambient Temperature ( C) IF - Pulse Input Current (mA) Figure 7. FOD0738 Typical Logic Low Output Supply Current vs Ambient Temperature 8.5 8.5 VDD = 5V IF = 12mA 8.0 Figure 8. FOD0738 Typical Logic High Output Supply Current vs Ambient Temperature IDDH - Logic High Output Supply Current (mA) VDD = 5V 8.0 IDDL - Logic Low Output Supply Current (mA) 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 -40 -20 0 20 40 60 80 100 5.5 -40 -20 0 20 40 60 80 100 TA - Ambient Temperature (oC) TA - Ambient Temperature (oC) 5 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Typical Characteristics (Continued) Figure 9. Input Forward Current vs. Forward Voltage 100 10 IF - Forward Current (mA) TA = 100oC 1 TA = 85oC 0.1 TA = 0oC TA = 25oC TA = -40oC 0.01 0.001 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 VF - Forward Voltage (V) 6 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Pulse Gen. tf = tr = 5 ns ZO = 50 1 IF 2 Input Monitor Node RIN 3 4 7 6 5 8 Vcc Pulse Gen. ZO = 50 tf = tr = 5 ns IF 1 0.1F Input Monitoring Node RIN 4 5 2 3 8 7 6 IF = 12mA Vcc Input t PHL tPLH 50% Output Monitoring Node Output Monitoring Node 0.1F Bypass 90% Output 10% tf 10% tr Waveforms 90% 2.5V CMOS VOL Test Circuit for FOD0708 Test Circuit for FOD0738 Fig. 10 Test Circuit and Waveforms for tPLH, tPHL, tr and tf. IF 1 IF A B VFF VCC Dual Channel 8 +5V B A 1 2 VFF 8 7 6 5 VCM 0.1F Bypass +5V Output VO Monitoring Node 2 7 0.1F bypass Output (VO) 3 6 3 4 4 GND VCM Pulse Gen 5 + - Pulse Generator ZO = 50 Test Circuit for FOD0738 Test Circuit for FOD0708 Peak VCM 0V VOH Switching Pos. (A), IF = 0 VO VO (Min) CM H VO (Max) Switching Pos. (B), IF = 12 mA CM L VO VOL Fig. 11 Test Circuit Common Mode Transient Immunity (FOD0708 and FOD0738) 7 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler 8-Pin Small Outline 0.024 (0.61) 0.060 (1.52) 0.275 (6.99) 0.155 (3.94) 0.050 (1.27) 8 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Ordering Information Option No Suffix R1 R2 Order Entry Identifier FOD0708 FOD0708R1 FOD0708R2 Description Shipped in tubes (50 units per tube) Tape and Reel (500 units per reel) Tape and Reel (2500 units per reel) Marking Information 1 0708 V X YY S 2 6 3 4 5 Definitions 1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) One digit year code, e.g., `5' Two digit work week ranging from `01' to `53' Assembly package code 9 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Carrier Tape Specification 8.0 0.10 3.50 0.20 0.30 MAX 4.0 0.10 2.0 0.05 O1.5 MIN 1.75 0.10 5.5 0.05 8.3 0.10 12.0 0.3 5.20 0.20 0.1 MAX 6.40 0.20 O1.5 0.1/-0 User Direction of Feed Reflow Profile 300 280 260 240 220 200 180 Time above 183C = 90 Sec >245C = 42 Sec 260C C 160 140 120 100 80 60 40 20 0 0 60 120 180 33 Sec 1.822C/Sec Ramp up rate 270 360 Time (s) 10 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST(R) ActiveArrayTM FASTrTM BottomlessTM FPSTM Build it NowTM FRFETTM CoolFETTM GlobalOptoisolatorTM CROSSVOLTTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM E2CMOSTM i-LoTM EnSignaTM ImpliedDisconnectTM FACTTM IntelliMAXTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM DISCLAIMER ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET(R) UniFETTM VCXTM WireTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDiS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I17 11 FOD0708/FOD0738 Rev. 1.0.6 www.fairchildsemi.com WWW..COM Copyright (c) Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www..com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www..com |
Price & Availability of FOD0708
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |